Any chance the sticker is still attached for cross reference purposes?
Does this help?
Four Winns shows
Waste
026-0654-02
SENDER, WASTE 16" #TS-16
Fresh Water
026-0606-02
SENDER, WASTE 11" (UNI) PTS-10 NLA
| www.iFourWinns.com https://smwebhead.com/phpBB3/ |
|
| Vista 378 - can't work out tank level sender size https://smwebhead.com/phpBB3/viewtopic.php?f=6&t=12679 |
Page 1 of 1 |
| Author: | Pilotpak [ Sun Mar 09, 2014 6:58 pm ] |
| Post subject: | Vista 378 - can't work out tank level sender size |
I'm replacing the 3 Xintex tank-level senders on all tanks on my V378 that aren't working. The Xintex website only offers 1 1/2 inch NPT senders, but when I measure the diameter of the old Xintex sender with calipers, it measures 1.9 inches (48.2mm). I'm in Australia, so I don't want to order the wrong size. Am I missing something with the way the thread diameters are measured ?? |
|
| Author: | Bliss36 [ Sun Mar 09, 2014 7:07 pm ] |
| Post subject: | Re: Vista 378 - can't work out tank level sender size |
Any chance the sticker is still attached for cross reference purposes? Does this help? Four Winns shows Waste 026-0654-02 SENDER, WASTE 16" #TS-16 Fresh Water 026-0606-02 SENDER, WASTE 11" (UNI) PTS-10 NLA |
|
| Author: | Pilotpak [ Sun Mar 09, 2014 7:19 pm ] |
| Post subject: | Re: Vista 378 - can't work out tank level sender size |
Very strange you ask - I actually have the Fresh Water sender in my brief case at work with me right now. I did however, elect not to bring the holding tank sender with me. The part number is TS-11-3 605. Boat is a 2006 Vista 378. I believe my fresh water tank is 350mm in depth . |
|
| Author: | Bliss36 [ Sun Mar 09, 2014 7:28 pm ] |
| Post subject: | Re: Vista 378 - can't work out tank level sender size |
Quote: I did however, elect not to bring the holding tank sender with me.  Just read about your fire...Glad to hear your family got off the boat safely.Really hope your luck turns around soon. |
|
| Author: | Pilotpak [ Sun Mar 09, 2014 7:34 pm ] |
| Post subject: | Re: Vista 378 - can't work out tank level sender size |
Thanks Bliss36 How weird is this - Your sender is the same diameter as mine. The specs say it's a 1 1/2' fitting, but the diameter of the threaded part is way bigger than 1 1/2' |
|
| Author: | jsimon [ Mon Mar 10, 2014 12:34 am ] |
| Post subject: | Re: Vista 378 - can't work out tank level sender size |
Pilotpak wrote: Thanks Bliss36 How weird is this - Your sender is the same diameter as mine. The specs say it's a 1 1/2' fitting, but the diameter of the threaded part is way bigger than 1 1/2' NPT (national pipe thread) is the measurement of the inside size of the pipe. So 1 1/2" will be very close to 2" on the outside of the threads. |
|
| Author: | Pilotpak [ Mon Mar 10, 2014 3:48 pm ] |
| Post subject: | Re: Vista 378 - can't work out tank level sender size |
Thanks Jeff, That now makes sense. I knew that pipes had different ways of measuring the diameter, but I never thought that would have extended to something as simple as a hole in a water tank. I'll now order the right size sender ! 
|
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|