www.iFourWinns.com
https://smwebhead.com/phpBB3/

horns
https://smwebhead.com/phpBB3/viewtopic.php?f=21&t=8641		 Page 1 of 1
Author:  aussie_sundowner [ Sun Nov 27, 2011 3:26 am ]
Post subject:  horns
anyone now somewhere that sells the fiamm am80 horns - mines dead, and they dont seem easy to find on ebay . westmarine etc ?
Author:  TrentDickson [ Wed Feb 22, 2012 8:18 pm ]
Post subject:  Re: horns
I ordered mine through west marine
Author:  230 Mike [ Wed Feb 22, 2012 11:30 pm ]
Post subject:  Re: horns
You might not be interested, but if you're replacing horns this may be worth a look:

viewtopic.php?f=21&t=2304&st=0&sk=t&sd=a&start=60

Scroll down to Flying Sushi's post of 7/14/09 @ 12:06pm. That's where the details start getting specific.
Author:  scotchwater [ Thu Feb 23, 2012 12:37 am ]
Post subject:  Re: horns
Mike, I tried to find that horn everywhere back then. Both on-line and on the West Coast. If you find a place I can get it, let me know. Seems to me I even tried with the different #'s Sushi had and still had no luck.....

If I had to pick a weak point on the boat, I would ask FW's why would you install a horn that no one can hear????
Author:  230 Mike [ Thu Feb 23, 2012 8:55 am ]
Post subject:  Re: horns
OK, I pulled my receipt. Mine ended up coming from Carquest Auto Parts of Cadillac, MI. They shipped it UPS. Phone 231-775-9772. Their part #SGT 72223. Price $38.43 (over 2 years ago).

If the part is still available, I would think any Carquest ought to be able to order it (but maybe not).

I would say the dual is a definite improvement - but it still just sounds like a better car horn. :P Without a place to mount real horns, I'm not sure there's a better option. The thought crossed my mind of getting two of the dual sets, and mounting one of them on the starboard side so at least all the sound wouldn't be coming from one side of the boat, but then I laid down until it went away.
Author:  Cap'n Morgan [ Thu Feb 23, 2012 9:07 am ]
Post subject:  Re: horns
The reason your Fiamm horn was easily obtainable in Cadillac, MI. is because the manufacturing plant is there, that is why Four Winns uses their horns, since they are less than 2 miles apart. Carquest in Cadillac can just pick up the parts down the street from the Fiamm plant.

FIAMM Technologies, LLC
Horn Division. Cadillac Engineered Plastics (CEP).
1550 Leeson Avenue
Cadillac, Michigan 49601 - USA
Telephone: 231-775-2900
Fax: 231-775-6162
Main Email: info.acousticdevices@fiamm.com
Author:  230 Mike [ Thu Feb 23, 2012 9:58 am ]
Post subject:  Re: horns
Thanks Cap'n, I thought it might be more than a coincidence that they were both in Cadillac.
Author:  ric [ Thu Feb 23, 2012 11:23 am ]
Post subject:  Re: horns
You gotta remember that Four Winns makes the hull, but rarely did they ever make any of the bits and pieces that bolt on to it. Just search the part #s on the horn itself, not four winns #s, you'll find it's just a generic part and can be replaced by any similar generic part.

90% of my 2000 H180 is Attwood, the other 10% is Taylormade. I noticed though they are really starting to get "custom" with their hardware on the new models. In house seats, steering wheels, gauges, doors, latches, windows, windshields, etc. I think that's why a bunch of you guys are hot and cold on the new Four Winns designs. On every brand boat from early 2000's and older they were all the same using all the same parts, just in a different order. Now, the familiar stuff we've all seen for the last 20 years is going away for more automotive like designs were each model is custom, instead of just being floating parts bins from a marine catalog.
Author:  scotchwater [ Thu Feb 23, 2012 1:47 pm ]
Post subject:  Re: horns
Thanks Mike & Cap'n! I'll give them a call and see if I can't order and have them shipped to me. I can't even hear my horn, especially if I'm running with the exhaust opened up. At an idle, I've heard farts louder than the horn.....
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/