www.iFourWinns.com

For those that have done it before how hard is it to get a socket into each of the 8 holes? I don't see anyone that has a video on this. I have done many plug changes over the years between Cars, Jet Ski and boats. Just curious how tight and what tools people recommend. The boat is 1200 miles away and was just winterized so it is a spring project once it is in the water.

Thanks Bill

_________________
2001 Sundowner 235

It’s not hard at all. The Volvo style manifolds & even the Barr Marine aftermarket versions allow enough room for easy access.

_________________
88 Four Winns 200 Horizon
4.3 OMC Cobra-4bbl
2002 Walker Bay 10/2012 Suzuki 2.5
2008 Walker Bay 8

1998 Jeep Grand Cherokee 4.0/Selectrac
2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II

5/8ths socket, extension & 3/8ths drive ratchet. Easy job.

_________________
88 Four Winns 200 Horizon
4.3 OMC Cobra-4bbl
2002 Walker Bay 10/2012 Suzuki 2.5
2008 Walker Bay 8

1998 Jeep Grand Cherokee 4.0/Selectrac
2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II

Great. Thank you very much

_________________
2001 Sundowner 235

You’re welcome. Been changing plugs doing tune ups etc since 1972. First one I learned on was a ‘72 Chevy Impala 350 cu in V8 which is basically the same thing!

_________________
88 Four Winns 200 Horizon
4.3 OMC Cobra-4bbl
2002 Walker Bay 10/2012 Suzuki 2.5
2008 Walker Bay 8

1998 Jeep Grand Cherokee 4.0/Selectrac
2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II